DACT

Attenuator

Audio Visual

Balance

Mono

Stereo

The CT2 Audio Volume Controls are high quality stepped 24-position attenuators. They were designed for maximum sonic quality, accuracy and reliability. Their series resistor networks consist of 23 non-inductive, low noise, SMD metal film resistors. The gold plated high precision rotary switch is manufactured in Switzerland.

Part No.	Product Name	Price Cdn ($)	UOM
CT2-10K-6	10K AV Attenuator 6 Deck	672.00	ea

Part No.	Product Name	Price Cdn ($)	UOM
CT2-10K-4	10K Balance Attenuator 4 Deck	439.00	ea
CT2-20K-4	20K Balance Attenuator 4 Deck	439.00	ea
CT2-50K-4	50K Balance Attenuator 4 Deck	439.00	ea
CT2-100K-4	100K Balance Attenuator 4 Deck	439.00	ea

Part No.	Product Name	Price Cdn ($)	UOM
CT2-10K-2	10K Stereo Attenuator 2 Deck	243.00	ea
CT2-20K-2	20K Stereo Attenuator 2 Deck	243.00	ea
CT2-50K-2	50K Stereo Attenuator 2 Deck	243.00	ea
CT2-100K-2	100K Stereo Attenuator 2 Deck	243.00	ea
CT2-250K-2	250K Stereo Attenuator 2 Deck	243.00	ea

Part No.	Product Name	Price Cdn ($)	UOM
CT2-10K-1	10K Mono Attenuator 1 Deck	184.00	ea
CT2-20K-1	20K Mono Attenuator 1 Deck	184.00	ea
CT2-50K-1	50K Mono Attenuator 1 Deck	184.00	ea
CT2-100K-1	100K Mono Attenuator 1 Deck	184.00	ea

Balance Control

CT4 is a 23 step control that allows precision balancing adjustments of ±¼ dB increments with a total range of ±3 dB. All contacts and wipers are gold plated. Again, it’s built exudes quality and stands behind the DACT name.

Part No.	Product Name	Price Cdn ($)	UOM
CT4-25K-2	25K Stereo Balance Control	315.00	ea
CT4-250K-2	250K Stereo Balance Control	315.00	ea

Enclosures

The easy way to convert your DACT DIY designs into a completed high-end audio product with the finish quality comparable to the best ready-made products. The CT-encl1 comes with all required outer panels and internal pre-drilled mounting plates. Two available finishes - natural alu colour anodized and black anodized.

Part No.	Product Name	Price Cdn ($)	UOM
CT-encl1/blk	Black Aluminum Enclosure	238.00	ea

Module

The CT100 is a versatile high performance two-channel phono preamp module. It is built with the best semiconductors available and with non-inductive, low noise, SMD metal film resistors. The circuit is designed to accept both moving coil (MC) and moving magnet (MM) transducers/cartridges. The combination of accurate RIAA equalization, extreme low noise and distortion makes it a very tough product to beat in terms of quality and sonic performance.

Part No.	Product Name	Price Cdn ($)	UOM	Qty
CT100	CT100 Phono Stage Module	1008.00	ea

CT101 is a stereo wideband audio Line Stage module. It is built on a compact PCB, which together with the use of SMD components yields a very short signal path. All connectors and PCB traces are gold plated. It is capable of driving difficult loads and long cables. CT101 is built as two mono preamplifiers on one PCB, and can be powered by two individual supplies. It also has selectable gains of 0, 6 or 12 dB.

Part No.	Product Name	Price Cdn ($)	UOM	Qty
CT101	CT101 Line Stage Module	290.00	ea

CT102 is the ideal power supply for low-consumption high-end audio electronic circuits. Some of the key features are low dynamic output impedance, extremely wide band, fast regulation, very low noise, and switchable output voltage from +/-15VDC or +/-20VDC. It is the perfect partner to power the CT101 Line Stage module.

Part No.	Product Name	Price Cdn ($)	UOM	Qty
CT102	CT102 Power Supply Module	470.00	ea

Selector Switches


CT3-5-4/pcb	CT3-5-4/wire	CT3-5-8/wire

CT3 is a compact and versatile 2 channel, 5 input, 4-pole selector switch. The quality standards are identical to that of the CT2 attenuator. All contacts are gold plated for longevity. A well thought out design that switches signal and ground of 2 channels simultaneously. An effective way to prevent input sources from short-circuiting each other when the switch is in operation.

CT3-5-8 Audio Input Selector Switch 24K Gold Plated Tracks - 2 Channel, 5 Input, 8-Pole Wire Mount. 8-pole switch. Solder lugs for wire connections. Non-shorting. Switches up to either: i) 4 channels with signal and ground simultaneously. ii) 8 channels, signal only. iii) 4 balanced channels, + and - signal only (excl. ground). iv) 2 balanced channels, +/- signal and ground for both channels.

Part No.	Product Name	Price Cdn ($)	UOM
CT3-5-4/pcb	Selector Switch PCB Mount	115.00	each
CT3-5-4/wire	Selector Switch Wire Mount	115.00	each
CT3-5-8/wire	Selector Switch Wire Mount	182	each