After two years in
development, Audia Flight is proud to introduce their new PHONO
preamp.
There will be a
forthcoming review by a major US audiophile print publication soon.
A separate power supply, the dedicated input
preamplifier boards, the high gain (74dB in its maximum
selection), the low noise are only few of the characteristics.
A
fully active phono preamp without a step-up transformer!
Of
course the separate power supply was chosen to improve the
shielding of the preamp and to reduce to zero the vibrations and
resonance from the transformers.
On the preamp chassis, there is a low noise
mosfet power supply for the second gain stage and another power
supply for the first gain stage, so, in total, there are six
power supplies!
It is possible to order the Audia Phono preamp
with the input gain board desired (MM and MC, or two MM inputs,
or two MC inputs).
On both input boards the impedance selectors are
very close to the input stage and it is made by professional
gold jumpers from the rear panel.
Custom resistors can also be used for precise
cartridge matching. This is also done from the rear panel. The possibilities for impedance matching is infinite!
